Off-Line Time; Drive Configuration - ADIC VLS AIT Installation And Operating Manual

Off-Line Time

Lets you set the number of minutes the VLS will remain in the Off-Line mode. If someone
leaves the VLS in an Off-Line mode, after the pre-set number of minutes the VLS will
automatically return On-Line. This assures that your automatic backup will be done even if the
VLS has accidentally been left Off-Line.
Use UP or DOWN
Line. Press ENTER to execute the change.

Drive Configuration

This function lets you enable or disable which drives are on-line.
Use LEFT
to select "Y" to put the drive on-line or "N" to disable the drive. If you have only one drive
installed, you cannot access the Drv B field.
Disabling both drives is not allowed (setting "N" in Drv A or Drv B field automatically places
"Y" in the other field).
22
Equipment Description
to select the number of minutes you wish the VLS to remain Off-
or RIGHT to select the drive you wish to change. Use UP
Note
Note
Note
or DOWN