Before the library can be used, there is some basic configuration that must be done. Configuration varies
depending on the type of library and the features that will be used. Before configuring the library, you should
review the following:
•
Existing Technical Bulletins for the product
•
Release Notes and Errata for the product
Configuration Pre-requisites
Before configuring the library, you will need to obtain the following information from the customer:
•
Proposed IP of library
•
Subnet Mask for local network
•
IP Gateway for local subnet
•
IP of SMTP server
•
Access account of SMTP server
•
Customer e-mail addresses (if they wish to set up e-mail notification)
Scalar i2000 Installation Guide
Configuring the Library
75