Table of Contents
Advertisement
Verifying Level Condition
Required tools: digital level
1
Position the digital level at the bottom of the frame just inside the front door.
Ensure that the digital level is not resting on any debris that would cause an
Note
inaccurate reading.
2
Verify that the system is level left to right and front to back.
A reading that is 0.00 +/- 0.30 is to be considered level. If the system does not meet 0.00 +/- 0.30
leveling requirement, go to
Setting the Leg Lock Nuts
Scalar i2000 Installation Guide
Additional Leveling
on page 16. If the system is sufficiently level, go to
on page 16.
15
Advertisement
Table of Contents
Need help?
Do you have a question about the Scalar i2000 and is the answer not in the manual?