Call Block - Oricom CARE920-1 User Manual

Through cordless handset:
1. Select a desired entry in the call list.
2. Press or
3. Confirm? will show, Press
Call Waiting
You hear a tone in the handset earpiece if someone calls while you are already
on a call.
Using handset from the base unit
• Long press R key on combo base to put your current call on hold and take
the new call.
• Long press R key on combo base to switch back and forth between calls.
Using cordless handset
• Long press R key on cordless handset to put your current call on hold and
take the new call.
Long press R key on cordless handset to switch back and forth between
•
calls.

Call Block

This telephone is built-in with Smart Call Block feature*. This feature will help
you avoid unwanted calls by only allowing some numbers to make your phone
ring.
*This feature requires a subscription of Caller Line Identification service from
your telephone service provider
Setting
Off
On
to select Delete All, and then press
CALL BLOCK OVERVIEW
Explanations
Call Block function (Block all call with numbers) is Disabled.
This is the default mode.
Call Block function is set to Manual. Numbers registered in the
black list will not go through and the phone will ring silently.
Numbers can be added to the list while the phone is ringing
and / or after a call (to enable, see part "Manual call block
mode").
to confirm. You hear confirmation tones.
41
Call Block
.