Oricom CARE920-1 User Manual page 43

Enable MANUAL mode
Menu
In idle mode,
Press , press
Press , press
Press , press
OR
In idle mode, press
After you enable this option, the call block icon will be displayed on the LCD.
Add numbers to Blocklist
In idle mode,
key, Call Block and its icon is displayed, then press
1. Press
select Blocklist,
press to show Blocklist numbers.
2. Press or
to select Add new, enter number to be blocked, press
3. Press
NOTE: Alternatively, you can add incoming and outgoing call numbers to the
Block list:
1. From incoming call numbers
Press , to enter Call list, press
Call List.
Press Menu, press
Press Ok to show selected number, press
Edit numbers in Block List
In idle mode,
1. Repeat step 1 and 2 in Section "Add numbers to Blocklist". to select the
stored numbers.
2. Press , press
Call block
to select Call Block.
or
or to select Block Set.
to select On (manual mode).
or
to access Block Set. directly.
to select numbers stored in Blocklist.
to select Add to Block.
or
or to select Edit, press
Block set.
or to select the stored numbers in
to save to Block list.
to save.
43
Call Block
Off
On*
VIP OK
Contacts OK
or to
to save.