Oricom CARE920-1 User Manual page 9

Amplified phone with direct dial picture buttons and cordless handset
Table of Contents

Advertisement

Connecting the Charger
Plug the power adapter into a mains socket.
If you have a Broadband line.
If you connect your telephone to a line with a broadband connection, you will
need to insert a micro-filter between the telephone and the telephone line,
otherwise you may get interference between the telephone and the broadband.
In a fixed line with broadband, every telephone must have a micro-filter
connected, not just the one at the telephone point that your modem is connected
to. (Broadband filters not included)
Installing and charging the batteries
1. Slide down to open the battery compartment cover on the cordless phone.
2. Place the 3 supplied AAA-size NiMH rechargeable batteries as indicated.
Pay extra attention to direction of polarity.
3. Reinstall the battery cover.
4. Place the handset on the base and charge for 15 hours before using the
handset for the first time.
Notes:
1. Use only the supplied NiMH rechargeable batteries.
2. If the handset will not be used for a long time, disconnect and remove the
batteries to prevent possible leakage.
9
Installing Your Phone

Advertisement

Table of Contents
loading

Table of Contents