Using the phone
10
Please note that the Incoming Call
LED indicator will flash once every
time the telephone line is taken
or released by your CARE95 Big
Button phone or any other phone
connected to the same phone line.
To adjust the handset volume the
switch on the underside must be
set to Hearing, see page 12.
*Need some help? Call 02 4574 8888 or go to www.oricom.com.au
Using the phone
Make a call
1. Lift the handset and wait for the dial tone (or if using
handsfree mode, press the
2. Enter the telephone number.
End a call
1. Replace the handset on the base (or if using handsfree
mode, press the
Receive a call
1. When you receive a call, the telephone rings and the
red incoming call LED on the base will flash. Simply pick
up the handset to answer the call (or press the
button to answer in handsfree mode).
Adjust the handset volume
Use the
handset volume.
Handsfree
Handsfree mode lets you talk to your caller without holding
the handset. It also allows other people in the room to listen
to your conversation over the loudspeaker. The green LED on
the button will illuminate when handsfree mode is in use.
button).
button).
buttons to increase or decrease the