Location; Installing Your Phone - Oricom CARE920-1 User Manual

Amplified phone with direct dial picture buttons and cordless handset
Table of Contents

Advertisement

Location

For maximum coverage and reduced interference, here are some guidelines
you should consider for base unit location,
- Place at a convenient, height, and central location with minimal obstructions
between the cordless handset and base unit in an indoor environment.
- Place away from electronic appliances such as televisions, microwave ovens,
radios, personal computers, wireless devices or other cordless phones.
- Avoid facing radio frequency transmitters, such as external antennas of mobile
phone cell stations.
- Avoid plugging it into the same powerpoint as other major household electrical
appliances because of the potential for interference.
Try moving the appliance or the base unit to another power outlet.
If reception is poor, try to relocate to base unit if possible.
Depending on the surrounding conditions as well as spatial and structural
factors, the range may be reduced. The range indoors is normally less than
outdoors.

Installing Your Phone

Connecting the Base Station
1. Plug one end of the telephone line cord into the telephone jack on the
bottom of the base.
2. Plug the small end of power adaptor into the bottom of the base into the
round socket.
3. Plug the mains power end of power adaptor into a wall power outlet.
4. Plug the other end of the telephone line cord in to the telephone jack.
5. Always use the cables provided in the box.
7
Location

Advertisement

Table of Contents
loading

Table of Contents