Oricom CARE920-1 User Manual page 42

Call Block
Contacts
VIP
ANONYMOUS
Manual call block mode
Manual call block is the easiest option when starting out. When you select ON
in the call block settings, all calling numbers registered in your blacklist will be
blocked. You can add/remove numbers from that list at any time.
How to block an incoming call:
When the phone is ringing and before answering, press
the call and offer you the option to register the number to the blacklist. Then to
confirm the registration of this number in the blacklist, press Ok.
IMPORTANT: if you don't confirm, the number will not be added to the blacklist.
NOTE: The following procedures (to "Enable MANUAL mode" to "Set Block
Anonymous Calls OFF") can also be performed from the telephone base. From
there, the difference is the icon
telephone base key.
In this automatic mode, any number not registered to
your phonebook will be automatically blocked. All calls
from contacts registered to your phonebook will proceed
normally.
When this mode is chosen, Contacts OK is displayed on
LCD in idle mode unless you have unread messages/
missed calls (to enable, see part "Contacts only").
In this second automatic mode, only calls from contacts
registered as VIP in your phonebook will ring through.
Any other number will not ring. When this mode is chosen,
VIPS OK is displayed on the LCD in idle mode unless you
have unread messages / missed calls (to enable, see part
"Contacts only").
This extra feature allows you to block calls that do not have
a number attached to them (ie private calls, international
calls, etc).
This option can be enabled in addition to any of the previous
four (to enable, see part "Anonymous call block mode").
/ described below corresponds to the
42
. It will terminate