Oricom CARE920-1 User Manual page 22

Using Your Phone
Call the indirect memories (Key 1 to Key 9)
Long press Key 1, or, ....Key 9 to dial.
Note: Before dialing, programming of key 1, ...key 9 is required, refer to Section
"Delete the entire list of the Call List".
Answer a Call
Through telephone base:
Press to answer a call. The hansdsfree mode will be activated or lift up
corded handset to answer.
Through cordless handset:
If the handset is not on the charging cradle, when the phone rings, press
End a Call
During a call,
Through telephone base:
Press or put back corded handset to end the call.
Through cordless handset:
Press , OR place the cordless handset on the charging cradle to end the call.
Set Photo A, B, C, D key memories
Input number and name
A, B, C ,D memories are shared by base and handset (same memories). Once
a direct memory is registered, it is automatically updated to the base or handset.
Through telephone base:
1. Press Menu in idle mode.
2. Press or
3. Press or
4. Select Add new, then press Ok , enter the telephone number, then enter
the name, then press Ok. You hear confirmation tones.
Note: When entering number or name, you can delete an error by pressing
BACK, last number or letter will be removed.
Through cordless handset:
1. Press on the handset in idle mode.
2. Press or
to select Direct Mem., then press Ok .
to select A, B, C, D, then press Ok.
to select Direct Mem., then press
22
.
.