Oricom CARE920-1 User Manual page 34

Registration Cordless Handset to Telephone Base
Intercom
Use the intercom feature for conversations between two cordless handsets or
between cordless handset and base.
In idle mode,
Intercom initiated from telephone base
1. Press Menu , and then press
2. If you have two or more cordless handsets, press
desired device and then press Ok.
3. The handset shows Call from Handset 2, the destination device rings.
4. To answer the call on the destination handset, press
OR, To answer the call on the base, press (speaker mode) OR ,lift up the
Corded handset to join and hang up to end call.
Intercom initiated from cordless handset
1. Press , and then press
press .
2. If you have two or more cordless handsets, press
desired device and then press
3. The cordless handset shows Call from Handset 2, the destination device
rings.
4. To answer the call on the destination handset, press
OR, To answer the call on the base, press (speaker mode).
Answer a Call / Auto Answer (Cordless handset only)
If the handset is not on the charging cradle:
When the phone rings, press
If the handset is on the Charging cradle and if Auto Answer is set to ON:
When the phone rings, pick up the handset directly to answer a call.
To set the Auto Answer on:
1. Press OK when idle.
2. Press or
3. Press or
4. Press or
5. Press Ok to confirm. You hear confirmation tones.
6. To answer the call on the base, press
Corded handset to join and hang up to end call.
to answer a call.
to select HS Setting, then press Ok.
to select Auto Answer, then press Ok.
to select On.
to select Intercom, then press Ok.
or
, then press or
.
(speaker mode), OR, lift up the
34
or to select the
, or any dialing key.
to select Intercom, then
or to select the
, or any dialing key,