Voltech AT3600 User Manual page 275

V AT3600 U
OLTECH SER
Three of the options require more than just pressing the third soft-key.
For 'Beeper Volume', pressing the soft-key CHANGE brings up an additional
display:
•
For 'Display Contrast', the additional display is very similar, again with ↑ and ↓ soft-
keys, which this time adjust the display contrast.
For the 'Clock' option, there are five fields to set up:
•
•
•
To reset the set-up options to the factory defaults:
Press the decimal point (".") on the instrument keypad during boot-up at the general
information screen. This will reset all tester options to the factory defaults, including
screen contrast and beep volume, excluding the real-time clock.
The factory default settings are:
F P O
RONT ANEL PERATION
M
ANUAL
Press the ↑ and ↓ soft-keys until the beeper makes the level of sound you require,
then press the EXIT soft-key to return to the Set-Up list.
Initially the cursor will be in the first field - 'yyyy' - which is the year. Type the
number you require using the keyboard, and press either the ENTER key ( ↵ ), or
the → soft-key to move to the next field.
For the second field - 'mmm' - which is the month, the soft-keys change to give
the names of each month. Press the appropriate soft-key to select which month.
The remaining fields - 'dd', 'hh' and 'mm' (day, hour and minute) are changed in
the same way as the year, using the number pad.
Option
FAIL Beeper
PASS Beeper
Key Response
Beeper Volume
Display Contrast
Program Store
Default Setting
OFF
OFF
CLICK
6
8
INTERNAL
VPN 98 - 024
P M
ROGRAM ODE
P 6.6.3.
AGE