Voltech AT3600 User Manual page 237

V AT3600 U
OLTECH SER
2.2 F
1. F
Designed for mounting existing fixtures to an AT series tester the fixture plate
comprises:
2. C
A kit of parts for constructing your own fixtures. Interconnecting wire, test probes or
clips and a drilling template will also be required. The custom fixture kit comprises:
3. 40 S
A fixture board fitted with 40 4mm sockets. 20 red (power) and 20 black (sense). The
sockets are wired to the 40 contacts which align with the tester's 40 nodes.
This fixture may be used for convenient wiring to existing fixtures or as a means of
connecting flying leads and clips for use in developing test programs or testing parts
in a design laboratory.
4. C
The hand clamp is supplied with 7 height blocks and fixings.
5. T
Drilling templates are available in a variety of sizes as described on page 5.2.5.
F
IXTURES
M
ANUAL
P
IXTURE ARTS
P
IXTURE LATE
• Item 1, Base plate (including contact pins) with cover.
• Item 2, Test piece interface plate.
• Fixings for above.
F
USTOM IXTURE
• Item 1, Base plate (including contact pins) with cover.
• Item 2, Test piece interface plate.
• Item 3, Probe housing box.
• Item 4, Bezel.
• Item 5, Guides (12 off)
• Fixings for above.
F
OCKET IXTURE
LAMP
OOLING
A
VAILABLE
K
IT
VPN 98 - 024 V07
D O T F
ESCRIPTION F HE
F V
ROM OLTECH
S
IXTURE YSTEM
P 5.2.7.
AGE