Voltech AT3600 User Manual page 232

D O T F
ESCRIPTION F HE IXTURE
A
The fixture is designed to connect to wound components with the following
characteristics:
C
A list of known suitable ATE pin types is available from Voltech.
P 5.2.2.
AGE
S
YSTEM
PPLICATION
Size:
A footprint of up to 63.5mm square
A height of up to 63.5mm
A connection matrix up to 60mm square
Connection Types:
Surface mount.
Pin connection.
Blade connection.
Flying leads
Pitches of: -
1.27mm
1.962mm(0.156")
2.00mm
2.5mm
2.54mm (0.1")
3.81mm (0.15")
There are some application limitations to the above, for example, the minimum
pitch of the blade type that can be connected to is determined by the minimum pitch
that the necessary connector can be put on.
Also though a 1.27mm pitch is available it is only anticipated that component
connections will be on multiples of this pitch and there will not be two connections
only 1.27mm apart.
OMPATIBLE CONNECTION TYPES
Kelvin clips
Kelvin blades (Automech type)
4mm sockets
ATE pin types
Rotary point
Castellated
Point
Cup
Crown
VPN 98 - 024 V07
V AT3600 U
OLTECH SER
F
M
ANUAL
IXTURES