Hardware Installation and Reference Guide
3.2
Before You Begin
Carefully plan and arrange the installation location, networking mode, power supply, and
cabling before installing the device.
Confirm the following requirements before installation:
The installation location provides sufficient space for heat dissipation.
The installation location meets the temperature and humidity requirements of the
device.
The power supply and required current are available in the installation location.
The Ethernet cables have been deployed in the installation location.
The selected power supply meets the system power requirements.
The position of the emergency power switch is found before installation, so that the
power switch can be cut off in case of accidents.
The diameter range of the pole to which the device is to be mounted meets the
parameter value requirements in the specifications.
3.3
Precautions
To ensure the normal operation and prolonged service life of the AP, observe the
following safety precautions:
Do not power on the device during installation.
Place the device in a well-ventilated environment.
Do not subject the device to high temperatures.
Keep the device away from high-voltage power cables.
Do not expose the device in a thunderstorm or strong electric field.
Keep the device clean and dust-free.
Cut off the power switch before cleaning the device.
Do not wipe the device with a damp cloth.
Do not wash the device with liquid.
Do not open the enclosure when the device is working.
23
Installation
Need help?
Do you have a question about the RG-AP680-AR and is the answer not in the manual?