Connecting The External Antenna; Bundling Cables; Precautions; Bundling Description - Ruijie RG-AP680-AR Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
When the AC power supply is used, use the RG-PL-M16-3M cable, properly insert it into
the port, and fix it. Then, paint waterproof cement and wrap waterproof tapes on the
connector.
Figure 3-12
3.6.5

Connecting the External Antenna

The feeder port of the external antenna uses a standard N-type connector, which is an N-J
connector (internal thread and internal needle).
3.7

Bundling Cables

3.7.1

Precautions

Bundle cables neatly to ensure aesthetics.

Bend twisted pairs naturally or to a large radius close to the connector.

Do not over tighten twisted pair bundle as it may reduce the cable life and

performance.
3.7.2

Bundling Description

After the cables are connected with the device through the waterproof plugs and
power-on is normal, use a cable tie to bundle the cables on the support and then fix the
cables neatly.
Connecting the AC Power Cable
33
Installation