Waterproof Requirements; Other Requirements; Tools - Ruijie RG-AP680-AR Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Installation
Ensure that the ground resistance is less than 5 ohms. In areas with high soil resistivity,

reduce the soil resistivity via measures such as spreading resistivity reduction mixture
around the grounding conductor.
2.2.7

Waterproof Requirements

Cap unused ports to ensure waterproof.
Figure 2-1 Dust Cap
Connect the network cable, optical fiber jumper, and AC power cable to the AP after they
pass through the corresponding waterproof plugs to ensure waterproof.
2.2.8

Other Requirements

Regardless of whether the device is installed on the wall or pole, the following conditions
must be met:
Sufficient space is reserved at the air inlet and air vents of the device, to facilitate heat

dissipation of the device.
The installation site allows for proper cooling and ventilation.

The installation side is sturdy enough to support the weight of the device and its

accessories.
2.3

Tools

Table 2-1 Tools
Common
Tools
Marker, Phillips screwdriver, flathead screwdriver, hammer drill,
segmented blade utility knife, network cable tester, related power cables
and optical cables, adjustable wrench, hammer, binding strap, waterproof
tape and cement
20
Preparing for