Before You Begin; Precautions - Ruijie RG-MAP852V3 Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
3.2

Before You Begin

Carefully plan and arrange the installation location, networking mode, power supply, and
cabling before installing the device.
Confirm the following requirements before installation:
The installation location provides sufficient space for heat dissipation.

The installation location meets the temperature and humidity requirements of the

device.
The power supply and required current are available in the installation location.

The Ethernet cables have been deployed in the installation location.

The selected power supply meets the system power requirements.

The position of the indoor emergency power switch is found before installation, so

that the power switch can be cut off in case of accidents.
3.3

Precautions

To ensure the normal operation and prolonged service life of the AP, observe the
following safety precautions:
Do not power on the device during installation.

Place the device in a well-ventilated environment.

Do not expose the device to high temperature.

Keep the device away from high-voltage power cables.

Install the device indoors.

Do not expose the device to a thunderstorm or strong electric field.

Keep the device clean and dust-free.

Cut off the power switch before cleaning the device.

Do not wipe the device with a damp cloth.

Do not wash the device with liquid.

Do not open the enclosure when the device is working.

Secure the device properly.

17
Installing the Access Point