Configuring The Scaler - evertz 7700 Manual

6.4.

CONFIGURING THE SCALER

The Key/Fill Up Converter scaler uses a process of filtering in order to increase or reduce the resolution
during up conversion. The Scaler menus are used to configure the cut-off frequencies of the filters
associated with the scaler hardware. The chart below shows the items available in the Scaler menu.
Sections 6.4.1 to 6.4.5 give detailed information about the menu items.
H Filter Cutoff
V Filter Cutoff
H Rate Limit
V Rate Limit
ARC
Panel Colors Red
Panel Colors Green
Panel Colors Blue
Input H Start
Input H Stop
Input V Start
Input V Stop
Output H Start
Output H Stop
Output V Start
Output V Stop
Sets the type of the horizontal filter in the scaler
Sets the type of the vertical filter in the scaler
Enable a rate limit on the horizontal edges.
Enable a rate limit on the vertical edges.
Selects the aspect ratio conversion to be performed
Sets the color of the letterbox panels.
Sets the color of the letterbox panels.
Sets the color of the letterbox panels.
Sets the left side crop position for custom aspect ratios
Sets the right side crop position for custom aspect ratios
Sets the top crop position for custom aspect ratios
Sets the bottom crop position for custom aspect ratios
Sets the left side of the output image for custom aspect ratios
Sets the right side of the output image for custom aspect ratios
Sets the top of the output image for custom aspect ratios
Sets the bottom of the output image for custom aspect ratios
Revision 0.2
7700 MultiFrame Manual
7710UC-KF HD Key/Fill Up Converter
7710UC-KF-13