Table of Contents
Advertisement
Quick Links
1.
OVERVIEW.......................................................................................................................................... 1
2.
INSTALLATION................................................................................................................................... 3
2.1. CARE AND HANDLING OF OPTICAL FIBER............................................................................ 4
2.1.1. Safety .............................................................................................................................. 4
2.1.2. Assembly......................................................................................................................... 4
2.1.3. Labeling........................................................................................................................... 4
2.1.4. Handling and Connecting Fibers ..................................................................................... 5
3.
SPECIFICATIONS............................................................................................................................... 6
3.1. SERIAL VIDEO INPUT ............................................................................................................... 6
3.2. OPTICAL OUTPUT..................................................................................................................... 6
3.3. ELECTRICAL ............................................................................................................................. 6
3.4. COMPLIANCE ............................................................................................................................ 6
3.5. PHYSICAL .................................................................................................................................. 6
4.
STATUS INDICATORS AND DISPLAYS ........................................................................................... 7
4.1. STATUS INDICATOR LEDS....................................................................................................... 7
4.2. DOT-MATRIX DISPLAY ............................................................................................................. 8
4.2.1. Displaying the Video Standard ........................................................................................ 8
4.2.2. Displaying The Equalization Strength ............................................................................. 9
4.2.3. Signal BLOCK Configuration........................................................................................... 9
4.2.4. Setting the Orientation of the Text on the Card Edge Display......................................... 9
4.2.5. Displaying the Firmware Version................................................................................... 10
4.2.6. Upgrade mode............................................................................................................... 10
5.
JUMPERS AND LOCAL CONTROLS .............................................................................................. 11
BY THE GLOBAL FRAME STATUS ........................................................................................ 11
5.3. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES .............................................. 11
6.
®
TABLE OF CONTENTS
Revision 1.2
7700 MultiFrame Manual
7707VT-4 Quad SDI Fiber Transmitter
®
Advertisement
Table of Contents
Related Manuals for evertz 7700
Summary of Contents for evertz 7700
-
Page 1: Table Of Contents
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter TABLE OF CONTENTS OVERVIEW............................1 INSTALLATION........................... 3 2.1. CARE AND HANDLING OF OPTICAL FIBER................4 2.1.1. Safety ..........................4 2.1.2. Assembly......................... 4 2.1.3. Labeling........................... 4 2.1.4. Handling and Connecting Fibers ..................5 SPECIFICATIONS.......................... - Page 2 7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter 6.1. W LINK ? ....................... 12 HAT IS ISTA ® 6.2. V LINK MONITORED PARAMETERS ................12 ISTA ® 6.3. VISTALINK CONTROLLED PARAMETERS................13 ® 6.4. V LINK TRAPS ........................13 ISTA ®...
- Page 3 Oct 08 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either express or implied.
- Page 4 7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter WARNING Never look directly into an optical fiber. Non-reversible damage to the eye can occur in a matter of milliseconds. Do not hook up the 7707VT-4 DWDM and 7707VR-4 cards directly with a short fiber optic cable.
-
Page 5: Overview
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter OVERVIEW The 7707VT-4 is a VistaLINK enabled, fiber transmitter for SDI, DVB-ASI or SDTi video signals. This ® single card combines up to four SDI, DVB-ASI or SDTi signals using Time Domain Multiplex (TDM) technology and transmits them over a single fiber. -
Page 6: Figure 1-1: 7707Vt-4 Block Diagram
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter Features: • Single card TDM multiplexer for four synchronous or asynchronous 270Mb/s SDI, SDTi or DVB- ASI video signals • Signal transport over fiber uninterrupted by loss of any SDI, SDTi or DVB-ASI input feed •... -
Page 7: Installation
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter INSTALLATION The 7707VT-4 comes with a companion rear plate that has four BNC connectors and one SC/PC (shown), ST/PC or FC/PC optical connector. For information on mounting the rear plate and inserting the module into the frame see section 3 of the 7700FR chapter. -
Page 8: Care And Handling Of Optical Fiber
Triangular band: black Symbol: black 2.1.2. Assembly Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by qualified Evertz technical personnel. 2.1.3. Labeling Certification and Identification labels are combined into one label. As there is not enough room on the product to place the label, it is reproduced here in the manuals. -
Page 9: Handling And Connecting Fibers
5 cm to avoid fiber-bending loss that will decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with cable lockout devices, to prevent the user from damaging the fiber by installing a module into a slot in the frame that does not have a suitable I/O module. -
Page 10: Specifications
Class 1 laser product Complies with 24 CFR 1040.10 and 1040.11 Complies with IEC 60825-1 EMI/RFI: Complies with FCC Part 15, Class A, EU EMC directive. 3.5. PHYSICAL 7700 or 7701 frame mounting: Number of slots: Page 6 7707VT-4 Revision 1.2... -
Page 11: Status Indicators And Displays
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter STATUS INDICATORS AND DISPLAYS The 7707VT-4 has 6 LED Status indicators and a 4 digit alphanumeric display on the front card edge to show operational status of the card at a glance. The card edge pushbutton is used to select various displays on the alphanumeric display. -
Page 12: Dot-Matrix Display
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter 4.2. DOT-MATRIX DISPLAY Additional signal and card status monitoring is provided via the 4-digit dot-matrix display located on the card edge. The card-edge pushbutton is used to select which data is being displayed in the alphanumeric display. -
Page 13: Displaying The Equalization Strength
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter 4.2.2. Displaying The Equalization Strength To display the Equalization strength, press the pushbutton one or more times until the EQ1, EQ2, EQ3 or EQ4 message is shown on the display. After one second the applied equalization strength will be shown represented as a percentage of the maximum equalizer capability. -
Page 14: Displaying The Firmware Version
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter 4.2.5. Displaying the Firmware Version The VER display shows the firmware version and build number of the 7707VT-4 firmware. The message will scroll across the display. The following provides an example of what will be displayed in the version VER xx BLD xxx menu. -
Page 15: Jumpers And Local Controls
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter JUMPERS AND LOCAL CONTROLS Several jumpers, located at the front of the module are used to preset various operating modes. Figure 4-1 shows the locations of the jumpers. 5.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED... -
Page 16: Vistalink ® Remote Monitoring/Control
1. An SNMP manager, also known as a Network Management System (NMS), is a computer running special software that communicates with the devices in the network. Evertz VL-Fiber demo Manager graphical user interface (GUI), third party or custom manager software may be used to monitor and control Evertz VistaLINK enabled fiber optic products. -
Page 17: Vistalink
7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter 6.3. VISTALINK CONTROLLED PARAMETERS ® The following parameters can be remotely controlled through VistaLINK interface. ® Parameter Description Allows user to change password that is needed in Change Password order to enable/disable video channels... - Page 18 7700 MultiFrame Manual 7707VT-4 Quad SDI Fiber Transmitter This page left intentionally blank Page 14 7707VT-4 Revision 1.2...
Need help?
Do you have a question about the 7700 and is the answer not in the manual?
Questions and answers