Image Data Management
You can carry out the following operations on the files in which images are
saved.
• Pair file processing
• Move
• Delete
• Rename
• Backup
• Restore
For an overview of file management, see page 85.
Note
During playback of a frame memory clip of the pair assigned to either of the
target FM selection buttons (see page 457), frame memory operations may not
be performed properly. Carry out frame memory operations after stopping clip
playback.
Pair File Processing
You can create a pair file from two single files. In the reverse direction, you
can split a pair file into two single files.
Creating a pair file from two single files
Note
Carrying out the following operation automatically switches [Pair] to On.
The following description applies to the case of FM1&2, but the procedures are
similar for the other cases.
1
2
3
468
Image Data Management
In the Frame Memory >Still >Recall menu or Frame Memory >Clip
>Recall menu, recall the two single files you want to convert to a pair file,
to FM1 and FM2.
Select the folder in which the file to be moved is stored.
In the Frame Memory menu, select VF4 'File' and HF1 'Pair
Recombination.'