Table of Contents
Advertisement
Knob
Parameter
1
Position H
2
Position V
a) See page 60.
To return the pattern position to the center of the screen
In the <Position> group, press [Center].
To move the pattern from its current position to the center through
the course of a transition
In the <Position> group, press [Auto Center], turning it on.
To set the wipe position using the trackball or joystick
You can also set the wipe position using the trackball or joystick in the device
control block.
1
In the device control block, press the [M/E1], [M/E2], [M/E3], or [P/P]
button, turning it on.
The buttons in the device control block are assigned to the wipe position
setting as follows.
Table 1: Buttons and assigned settings
Button name
MAIN
SUB
Table 2: Buttons assigned to functions
Button name
POS
X, Y
CTR
2
Press the [MAIN] button or [SUB] button, turning it on.
3
Press the [POS] button, turning Position on.
4
Move the trackball or joystick, to set the wipe position. By pressing the [X]
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction.
Adjustment
Horizontal position
Vertical position
Setting
Wipe position for common transition (main pattern)
Wipe position for common transition (sub pattern)
Function
Toggle Position on or off.
Fix the operating direction.
Return the pattern position to the center of the screen.
Setting values
–200.00 to +200.00
–200.00 to +200.00
Basic Procedure for Wipe Settings
a)
a)
395
Advertisement
Table of Contents
