Table of Contents
Advertisement
Output level
Black balance adjustment
It is also possible to mask part of the region to be corrected.
Secondary color correction
For the six colors R (red), G (green), B (blue), Y (yellow), C (cyan), and M
(magenta), adjust the luminance and saturation, and also the hue within a range
of ±30 degrees of the center value for each color.
You can mask a part of the region to be corrected.
Note
This function is disabled when spot CCR is enabled with a setup setting. For
details, see "Installation and Device Setup (Install/Unit Config Menu)" in
Chapter 16 (Volume 2).
RGB clip
For each of the R, G, and B signals, you can make dark clip and white clip
adjustments.
Luminance processing
After converting a signal to which RGB color correction has been applied to a
YUV signal, dividing the luminance levels into three regions, referred to as
Dark, Middle, and Bright, and applying video signal adjustments to these
regions.
204
Color Corrector
White balance adjustment
Input level
Output level
Gamma
correction
Knee correction
Input level
Unadjusted signal
Adjusted signal
Advertisement
Table of Contents
