Table of Contents
Advertisement
Interpreting the Menu
Screen
The menu screen consists of the following
principal parts.
When buttons on the screen are lit or
represented in a depressed state, this
indicates that the corresponding item or
function is selected (set on).
a Menu title button
This shows the title of the menu screen.
You can set different colors for the main
menu site and subsidiary menu site (see
page 295).
b Menu page number button
This shows the menu screen page number.
When you press this button, the top menu
window (see page 292) appears. You can
enter the page number for the desired menu,
or press one of the top menu selection
buttons in the window, to display that
menu.
While the system is accessing the hard disk,
the indicator lights red.
Note
When the indicator is lit, do not power off
the switcher.
c VF buttons
These indicate the larger subdivisions of
this menu.
Depending on the selected item, the menu
screen contents including the HF button
indications change.
282
Basic Menu Operations
Indicator for frame
memory external hard disk
Indicator for internal hard
disk
d HF buttons
These indicate the items within the menu.
Depending on the selected item, the menu
indications change.
Depending on the function, if any one is on,
the status is shown by an orange bar, as in
the following figure.
e Status area
This shows the status of the settings items
controlled by the selected menu.
An orange frame appears around the
parameter area relating to the displayed
menu. For each of the twelve areas,
pressing the display jumps to the related
menu.
f Function button area
This shows the functions which can be
operated in the currently selected menu by
means of buttons.
Each function button corresponds to a
function which can be set in the currently
selected menu. Press it to enable the
function, to display a parameter group and
adjust the parameters with the knobs, or to
execute the function.
These buttons are in groups by function. In
the screen example shown on the previous
page, the [Key Bus] and [Matte] function
buttons constitute the <Key Fill> group.
g Parameter group button
This displays parameter group names for
which the knobs can make adjustments, the
current parameter setting page number, and
the total number of the parameter setting
pages. (Example: Color Vector 1/2)
When there are more than five parameters
within the same parameter group, press this
button to display the sixth and subsequent
Advertisement
Table of Contents
