Table of Contents
Advertisement
Auto insert mode on/off setting
You can switch on or off the mode (auto insert mode) in which at the same time
that a control panel operation is carried out, the event is automatically saved in
a macro.
Editing a macro
You can carry out the following macro editing operations.
Event insertion
Insert the control panel operation as an event in a macro.
Event modification
Modify any event. You can modify all events within a macro, or events within
a specified range in a single operation.
Event deletion
Delete any one event. You can delete all events within a macro, or events
within a specified range in a single operation. You can then paste the deleted
event using the paste function.
Event copy
Copy any one event. You can copy all events within a macro, or events within
a specified range in a single operation.
Event paste
Paste a copied or deleted event at a desired position within a macro.
Undoing an editing operation
You can undo the last event insertion, modification, deletion, or paste
operation.
Macro merging
During macro editing, you can recall and copy another register to merge it with
the macro being edited.
For example, while editing macro register 2 you can recall and copy register 1
to merge it as shown in the following figure.
194
Macros
Macro event execution order:
Macro events:
Advertisement
Table of Contents
