Table of Contents
Advertisement
Reference region
When multiple regions are selected, only one region appears in the displays for
menu and numeric keypad operations. This is called the "reference region."
The reference region is determined according to the following precedence.
Master region
The regions saved in a master snapshot register or master timeline register and
the register numbers saved in such regions can be recalled at a time as the
master region.
The master region can be saved or recalled using the numeric keypad control
block.
Registers
A register is an area of memory in a device which holds a snapshot, keyframe,
macro, and so on.
For details of macros, see page 190.
Keyframe effect registers
Dedicated effect registers
There are 99 dedicated registers for keyframe effects in each region, numbered
1 to 99.
Shared user-programmable DME registers
In addition to the 99 DME registers for each region (i.e. each channel), there
are also shared registers for each processor as shown in the following table.
These are used for user-programmable DME.
Register number
101 to 199
201 to 299
301 to 399
Note
When operating with these shared registers, be sure to select the appropriate
regions depending on the number of channels. When recalling registers in the
150
Regions and Registers
M/E1 >M/E2 >M/E3 >P/P >User1 > User2 > User3 >User4 >User5
>User6 >User7 >User8 >DME ch1>DME ch2 >DME ch3 >DME ch4
>DME ch5 >DME ch6 >DME ch7 >DME ch8 >Device1 >Device2
>Device3 >Device4 >Device5 >Device6 >Device7 >Device8 >Device9
>Device10 >Device11 >Device12 >P-Bus >GPI >Router >Macro
Register allocation
Shared register for one-channel effects
Shared register for two-channel effects
Shared register for three-channel effects
Advertisement
Table of Contents
