Sony G363-ZR0-LAX1 User Manual page 358

Using the main mask
For example, to use the main mask for key 1 on the M/E-1 bank, use the
following procedure.
1
In the M/E-1 >Key1 menu, select HF3 'Main Mask.'
The Main Mask menu appears.
2
In the <Mask Type> group, select the mask type.
Key Mask: Masks a part of a key.
Bkgd Mask: Masks a part of a background.
3
In the <Mask Source> group, select the mask source.
Box: signal from the dedicated box generator
Pattern: signal from the dedicated pattern generator
4
Set the mask source parameters.
• When a box is selected
Knob
1
2
3
4
5
• When a pattern is selected
Knob
1
2
5
a) The pattern is the same as a standard wipe. (See "Wipe Pattern List" in Appendix (Volume
1) (page 494).)
To select the pattern, display the Mask Ptn Select menu by pressing the
[Mask Ptn Select] button in the Main Mask menu. After selecting one of
the patterns (standard wipe patterns 1 to 24) displayed in the Mask Ptn
Select menu, you can adjust the following parameters.
Knob
1
Parameter Adjustment
Top Top position
Left Left position
Right Right position
Bottom Bottom position
Soft Box softness
Parameter Adjustment
Size Pattern size
Soft Edge softness
Pattern Pattern number
Parameter Adjustment
Size Pattern size
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
a)
1 to 24
Setting values
0.00 to 100.00
Key Setting Operations Using Menus
357