Table of Contents
Advertisement
Meaning of the state of buttons
Off: Nothing is saved in the register.
Lit orange: Settings are saved in the register.
Lit yellow: The most recently recalled register.
Canceling the saving of a wipe snapshot
To cancel the saving of a wipe snapshot immediately after performing it, hold
down the [STORE STATS] button, and press the [UNDO] button. The
[STORE STATS] button changes from amber to green.
Note
On a simple type Flexi Pad control block, it is not possible to cancel the saving
of a wipe snapshot.
Recalling a wipe snapshot
1
2
Canceling the recall of a wipe snapshot
To cancel the recall of a wipe snapshot, press the [UNDO] button.
Deleting a wipe snapshot
When the [WIPE] button is lit in the Flexi Pad control block, hold down the
[STORE STATS] button and press the memory recall button for the register in
which you want to delete the wipe snapshot.
The indication of the memory recall button reverts from the wipe pattern or
register name to the register number.
Note
In a simple type Flexi Pad control block, it is not possible to delete a wipe
snapshot.
408
Wipe Snapshots
In the Flexi Pad control block, press the [WIPE] button.
This switches the Flexi Pad control block to the mode for recalling a wipe
snapshot.
Press the memory recall button for the register from which you want to
recall the wipe snapshot.
The button lights, and the saved wipe snapshot is recalled. At this point,
the numeric display shows the pattern number or register name.
Advertisement
Table of Contents
