Table of Contents
Advertisement
2
3
4
332
Simple Transition
Using one of the following methods, select the way in which the transition
will affect the image.
Use a combination of the transition type selection buttons ([MIX], [NAM],
[WIPE] and [DME]) and the next transition selection buttons ([KEY1] and
[KEY2]).
For an overview of the mix, NAM, wipe, and DME wipe transition types,
see "Transition Types" (page 38).
To change the background only: Press one of the [MIX], [NAM],
[WIPE], and [DME] buttons.
The [KEY1] and [KEY2]buttons go off, and the system changes to the
background transition mode.
To insert or delete key 1: Hold down the [KEY1] button and press one of
the [MIX], [NAM], [WIPE], and [DME] buttons.
To insert or delete key 2: Hold down the [KEY2] button and press one of
the [MIX], [NAM], [WIPE], and [DME] buttons.
To insert or delete key 1 and key 2 simultaneously: Hold down the
[KEY1] and [KEY2] buttons, and press one of the [MIX], [NAM],
[WIPE], and [DME] buttons.
To use a super mix or preset color mix: Select [Super Mix] or [Preset
Color Mix] in the Misc >Transition menu for the M/E or PGM/PST
bank.
To set the key priority, use the Misc >Key Priority menu for the M/E or
PGM/PST bank. For details, see "Setting the Key Priority by a Menu
Operation" (page 305).
Note
The transition type selection buttons ([MIX], [NAM], [WIPE], and
[DME]) can be assigned to other transition types in setup.
For details, see "Overall Control Panel Settings (Config Menu)" in
Chapter 16 (Volume 2).
Select the new background for after the transition.
• Select the background video with the background B row of cross-point
buttons.
• To insert a key, select the key signal, and make various settings as
required.
For details of key settings, see Chapter 4 "Keys" (page 337).
Depending on the transition type selected in step 2, make the required
settings.
For details of the settings, see the following sections:
Advertisement
Table of Contents
