Sony G363-ZR0-LAX1 User Manual page 374

Knob
4
Setting the embossing parameters
When the [EMBOS] button is lit green, adjust the following parameters.
Knob
1
2
4
Selecting a normal edge
When all five edge type selection buttons are off, a normal edge is selected. If
one of the buttons is lit, press it, turning it off.
Softening the edge
Press the [SOFT EDGE] button, turning it on. The button lights green, and you
can now adjust the softness with the knob.
Knob
1
• For a normal edge, when [SOFT EDGE] is enabled, "Key Drop" mode turns
on.
• When a luminance key or linear key is selected as the key type, and clean
mode is enabled, enabling [SOFT EDGE] ends the clean mode.
Applying the zabton effects
When the [ZABTN] button is lit green, adjust the following parameters.
Knob
1
2
Press the [MORE] button lit amber, changing it to green, then adjust the
following parameters.
Knob
1
2
Parameter Adjustment
Density Outline density
Parameter Setting values
Width 0 to 4
Position 359 to 0
Density 0 to 100
Parameter Adjustment
Soft Edge softness
Parameter Adjustment
Size Pattern size
Soft Pattern edge softness
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Setting values
0 to 100
Setting values
0 to 100
Setting values
0 to 100
0 to 100
Setting values
0 to 100
0 to 100
Key Setting Operations With the Key Control Block
373