Table of Contents
Advertisement
When, with a key inserted, a key is selected in the next transition
Key
Wipe
A wipe replaces the current video by the new video according to a
predetermined pattern. This transition type can also be selected for an
independent key transition.
For details, see "Wipes" (page 55) and Chapter 5 "Wipes" (page 383).
DME wipe
Using a DME effect, it is possible to obtain a transition to a new image from
the current image, as in a wipe. You can also use this transition type as an
independent key transition.
Note
To carry out DME wipes requires the BKDS-9470 DME Board Set or the
MVE-8000A/9000 Multi Format DME Processor.
For details, see "DME Wipes" (page 67) and Chapter 6 "DME Wipes" (page
411).
Clip transitions
Linked to a mix (dissolve) or wipe transition, a frame memory clip (movie) is
played back.
Cut
A cut switches instantaneously from the current video to the new video. When
the next transition is a key transition, the key cuts in or out instantaneously.
Executing a Transition
There are two modes of executing a transition: an auto transition by button
operation or a manual transition using the fader lever.
Key state preserved
Preset color mix (when set to preserve key state)
Key gradually
removed
41
Transitions
Advertisement
Table of Contents
