General; Dedrive Compact Sto Frequency Inverter; Symbols/Signal Words; Information On The Operating Instructions - DEMAG DIC 002 Series Operating Instructions Manual

1

General

1.1

Dedrive Compact STO frequency inverter

You have purchased a Demag quality product.
This frequency inverter is built in accordance with European standards and regulations and state-of-the-art engi‐
neering principles.
1.2

Symbols/signal words

Important safety information and instructions are marked by corresponding symbols and signal words in these in‐
structions.
Safety warnings and instructions must be followed. Exercise particular caution to ensure that accidents, injuries
and damage are avoided in such cases.
Locally applicable accident prevention regulations and general safety regulations must also be followed.
The following symbols and instructions warn against possible injuries or damage and are intended to assist you in
your work.
DANGER
This symbol indicates an immediate hazard which can result in serious injury or death.
– Follow these instructions at all times and be particularly careful and cautious.
WARNING
This symbol indicates a possibly hazardous situation which might result in serious injury or death.
– Follow these instructions at all times and be particularly careful and cautious.
CAUTION
This symbol indicates a possibly hazardous situation which might result in medium to light injury or damage.
– Follow these instructions at all times and be particularly careful and cautious.
Operating hazard for the machine.
● This symbol indicates information on appropriate use of the machine.
● This symbol indicates all warnings which, if not complied with, can result in malfunctions or damage.
1.3

Information on the operating instructions

These operating instructions are designed to provide the owner and operator with useful instructions for transport‐
ing, installing, commissioning, operating and maintaining our frequency inverters.
Persons entrusted with the various types of work must know and comply with the safety regulations and the oper‐
ating instructions.
The installation may only be operated by personnel who are fully familiar with the operating instructions. In partic‐
ular, they contain the "Safety" section and the relevant safety instructions in the working sections of these operat‐
ing instructions.
The operating instructions must be available to operating personnel at all times to prevent operating errors and to
ensure smooth and trouble-free operation of our products. They must be kept in the immediate vicinity.
6