Programming Parameters With Parcom Compact Software; General Information On Programming Parameters With Parcom Compact Software; Language Selection - DEMAG DIC 002 Series Operating Instructions Manual

7.4

Programming parameters with Parcom Compact software

7.4.1

General information on programming parameters with Parcom Compact software

Please observe the safety instructions,  "Hazards that can be caused by the frequency inverter", Page 10,
 "Safety instructions for assembly/installation", Page 27 and  "Safety instructions when putting the equipment
into service", Page 51.
A PC with Parcom Compact parameter programming software which is connected to one of the optional RS 232
modules 537 769 84 or 537 723 84 via data cable 537 237 84 can be used as an alternative to configure and
program the inverter parameters.
Communication with the inverter is only possible when the unit is connected to a line or 24 V power sup‐
ply.
7.4.2

Language selection

Fig. 35
56
There are no longer any parameter texts in Dedrive Compact STO fre‐
quency inverters that have device software 5.4.2/050-10 or later. The
texts are available in the form of *.lpi language files for Parcom Com‐
pact parameter-programming software.
The files in de, en, fr, es are available for download in every language
in the "Language file" section, see  Tab. 1, Page 2. Save the lan‐
guage file in the C:\Parcom Compact\Data directory.
The option can be set in the Parcom Compact menu:
Edit ➜ Settings ➜ Language.