Dic-4-Xxx-C - DEMAG DIC 002 Series Operating Instructions Manual

6.4.2.2

DIC-4-xxx-C

Fig. 11
CAUTION
Hot components due to insufficient cooling
Risk of burns on contact and fire hazard
A separate heat sink is required for DIC-4-xxx-C model frequency inverters.
The switchgear cabinet wall must be provided with an opening that is as large as the frequency inverter mounting
panel.
The heat sink is fitted to the switchgear cabinet from the outside.
Apply heat sink compound to the surface of the heat sink inside the switchgear cabinet and bolt the frequency
inverter to it.
Frequency inverter
Size 1 DIC-4-002 ... 004
Size 2 DIC-4-006 ... 009
Tab. 24
a b c a1
211 82 140 170
271 82 140 230
Dimensions in mm
a2 a3 a4 b1
30,5 75 75 71
50,5 115 75 71
b2 c1 m t
60 130 6,6 7
60 130 6,6 7
31