General; Drf 200 Friction Wheel Travel Drive; Symbols/Signal Words; Information On The Assembly Instructions - DEMAG DRF 200 Assembly Instructions Manual

1

General

1.1

DRF 200 friction wheel travel drive

You have purchased a Demag quality product.
This DRF 200 friction wheel travel drive was manufactured to European standards and regulations in accordance
with state-of-the-art engineering principles. The EC Machinery Directive requirements are satisfied.
1.2

Symbols/signal words

Important safety information and instructions are marked by corresponding symbols and signal words in these in‐
structions.
Safety instructions and information must be followed. Exercise particular caution to ensure that accidents, injuries
and damage are avoided in such cases.
Locally applicable accident prevention regulations and general safety regulations must also be followed.
The following symbols and instructions warn against possible injuries or damage and are intended to assist you in
your work.
DANGER
This symbol indicates an immediate hazard which can result in serious injury or death.
– Follow these instructions at all times and be particularly careful and cautious.
WARNING
This symbol indicates a possibly hazardous situation which might result in serious injury or death.
– Follow these instructions at all times and be particularly careful and cautious.
CAUTION
This symbol indicates a possibly hazardous situation which might result in medium to light injury or damage.
– Follow these instructions at all times and be particularly careful and cautious.
Operating hazard for the machine.
● This symbol indicates information on the appropriate use of the machine.
● This symbol in the operating instructions indicates all warnings which, if not complied with, may result in mal‐
functions or damage.
1.3

Information on the assembly instructions

These assembly instructions are designed to provide the owner and operator with useful instructions for transport‐
ing, installing, putting into service, operating and maintaining our DRF 200 friction wheel travel drive. These as‐
sembly instructions are an integral part of the installation.
Persons entrusted with the various types of work must know and comply with the safety regulations and the as‐
sembly instructions.
The installation may only be operated by personnel who are fully familiar with the assembly instructions. In partic‐
ular, they contain the "Safety" section and the relevant safety instructions in the working sections of these assem‐
bly instructions.
The assembly instructions must be available to operating personnel at all times in order to prevent operating er‐
rors and to ensure smooth and trouble-free operation of our products. They must be kept in the immediate vicinity.
1.4

Liability and warranty

All information included in these instructions has been compiled on the basis of the relevant regulations, state-of-
the-art engineering principles and our many years of experience.
These instructions must be read carefully before starting any work on and with the DRF 200 friction wheel travel
drive, especially before it is put into service for the first time. The manufacturer assumes no liability for any dam‐
age which results from the following:
5