Dic-4-150 To 210 Frequency Inverters - DEMAG DIC 002 Series Operating Instructions Manual

6.4.5

DIC-4-150 to 210 frequency inverters

Fig. 16
CAUTION
Hot components due to insufficient cooling
Risk of burns on contact and fire hazard
The units must be fitted with sufficient clearance to allow cooling air to circulate without any hindrance.
Ensure that air pollution from sources such as dust, greases, aggressive gases, etc., is avoided.
The mounting holes are 9 mm in diameter.
Install the unit by bolting the rear wall of the frequency inverter heat sink to the mounting panel.
Frequency inverter
Size 7 DIC-4-150 ... 210
Tab. 29
36
a b c
510 412 351
Dimensions in mm
a1 b1
480 342
c1
241