Transport, Packing And Storage - DEMAG DIC 002 Series Operating Instructions Manual

4.2

Transport, packing and storage

Safety warnings
WARNING
Falling parts
Risk of injury from falling parts during transport, loading and unloading operations.
– Do not step under suspended loads. Keep a sufficient safety distance.
– Cordon off a large area around the working zone.
WARNING
Damage caused in transit
The frequency inverter can be damaged or destroyed by inappropriate transport.
Attach lifting and handling equipment only at suitable points.
Scope of delivery
If special designs or additional options are ordered or the latest technical modifications are incorporated, the ac‐
tual scope of supply may differ from the data and information as well as from the illustrations described here. If
you have any questions, please contact the manufacturer.
Transport inspection
● Check that the delivery is complete and check it for any transport damage immediately on receipt.
● If any transport damage is visible from the outside, do not accept the delivery or only on condition. Note the
scope of damage in the shipping documents/delivery note of the forwarding company. Lodge a claim.
● Lodge a claim for any defects as soon as they are detected, since claims for damages can only be asserted
within the relevant claim notification periods.
Packing
If no agreement has been made on the return of the packing material, separate the materials according to type
and size and make them available for further use or recycling.
Environmental protection:
● Always dispose of packing materials in an environmentally compatible way and according to locally applicable
disposal regulations.
● If required, utilise the services of a recycling company.
Storage
Until they are installed, the equipment and accessories must be kept closed and may only be stored under the
following conditions:
● Do not store outdoors.
● Store in a dry and dust-free location. Observe the climatic conditions according to EN 50178 and the symbols
on the packing.
● Do not expose to aggressive media.
● Protect against direct sunlight.
● Avoid mechanical vibrations.
● Avoid strong temperature fluctuations (condensation).
● Check the general condition of all parts of the packing at regular intervals.
● The unit must not be stored for more than one year without being connected to the permissible rated voltage.
25