1. Verify the marriage ring is installed correctly and an anti-tamper alarm does not appear on the
touch panel.
2. In the left navigation menu, select Service Setup > Marriage Setup.
3. Select Start and complete the Marriage Setup wizard.
At the Arming stage, enter the Marriage password.
4. Select Finish.
Disposing of the product packaging
Once the product has been installed and set up, Christie recommends reusing or recycling the product
packaging according to your local regulations.
Completing the installation checklist
Complete the provided installation checklist (P/N: 020-103137-XX) and return it to Christie.
CP2309-RGB Installation and Setup Guide
020-103078-04 Rev. 1 (11-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
26