Turning The Projector On For The First Time; Disposing Of The Product Packaging - Christie CP2415-Xe Installation And Setup Manual

1 AC switch
2 100-240 V secondary inlet
3 200-240 V main inlet
4 Grounding lug nut

Turning the projector on for the first time

Learn how to turn the projector on for the first time. Use this procedure to ensure successful
communication with input devices and to align the lamp.
1. Assign the projector a unique IP address:
a) In the left navigation menu, select Service Setup > Network Settings.
b) On the Ethernet tab, either Obtain the IP address automatically or enter the IP
address for the projector in the IP Address field.
2. Enter the lamp information.
a) In the left navigation menu, select Lamp Settings > Lamp History.
b) Select + New Lamp.
c) Complete the fields in the New Lamp dialog.
d) Select Add.
3. Select and hold the Power button to turn on the projector.
4. Complete a LampLOC
a) In the left navigation menu, select Lamp Settings > LampLOC.
b) Select Auto Align.

Disposing of the product packaging

Once the product has been installed and set up, Christie recommends reusing or recycling the product
packaging according to your local regulations.
CP2415-Xe Installation and Setup Guide
020-103584-02 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™ alignment on the new lamp.
Installation and setup
25