Christie CP2309-RGB Installation And Setup Manual page 11

Hide thumbs Also See for CP2309-RGB:
Table of Contents

Advertisement

E—Represents the top view of the projector.
F—Represents the side view of the projector.
The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to
its most hazardous position.
For US and international hazard distances based upon IEC 62471-5:2015, Photobiological Safety of
Lamps and Lamp Systems – Part 5: Image Projectors.
Projection lens
1.2-1.72:1 .69" DLPCine zoom lens
1.33-2.1:1 .69" DLPCine zoom lens
1.62-2.7:1 .69" DLPCine zoom lens
2.09-3.9:1 .69" DLPCine zoom lens
The following graph is for reference only and the above hazard distance of the table must be followed.
CP2309-RGB lenses hazard distances
3
2.5
2
1.5
Hazard
distance
(m)
1
0.5
0
0
CP2309-RGB lenses
For Installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
The projection room shall be clearly identified by the posting of laser warning and restricted
access signs, and by restricting entry through physical means. The projection room sign must
display the warning "No direct exposure to beam shall be permitted".
CP2309-RGB Installation and Setup Guide
020-103078-04 Rev. 1 (11-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Part number
108-494108-XX
108-495109-XX
108-496100-XX
108-497101-XX
0.5
1
1.5
Hazard distance
(m)
1.1
1.4
1.8
2.7
2.5
3
2
Throw ratio
Introduction
3.5
4
4.5
11

Advertisement

Table of Contents
loading

Table of Contents