Christie CP2309-RGB Installation And Setup Manual page 37

2. Set the projector brightness level to approximately 50% to 60%.
3. Retrieve the 3 mm hex driver supplied with the projector.
4. Remove the top cover of the projector.
5. Loosen the two integrator lock screws.
6. Loosen the lock screw located next to the Focus adjustment slider.
7. Unlock the fold mirror screws to unlock the adjustment knobs.
CP2309-RGB Installation and Setup Guide
020-103078-04 Rev. 1 (11-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image
37