Table of Contents
Advertisement
4.8
LIFTING AND TIE DOWN
(See Figure 4-8.)
Lifting
1.
Refer to Serial Number Plate, Specifications section of this
manual, or weigh the individual unit to determine Gross
Vehicle Weight.
2.
Place boom in stowed position.
3.
Remove all loose items from machine.
4.
Properly adjust rigging to prevent damage to machine and
keep machine level.
31215018
SECTION 4 - MACHINE OPERATION
Tie Down
WHEN TRANSPORTING THE MACHINE IN THE STOWED POSITION, THE BOOM MUST BE
FULLY LOWERED INTO THE BOOM REST.
NOTE:
Putting the platform in certain positions for transporting may
cause an LSS activation that restricts normal boom functions. To
resolve this LSS activation, use the auxiliary power from the
ground control console to place the platform in the desired posi-
tion. Use of the MSSO will result in a MSSO fault.
1.
Place boom in stowed or storage position.
2.
Remove all loose items from machine.
3.
Secure chassis and platform using straps or chains of ade-
quate strength.
4-29
Advertisement
Table of Contents
