Methods; Canceling Maintenance Standstill; Maintenance Standstill Cleaning - JLG 400SC Operation And Safety Manual

Hide thumbs Also See for 400SC:

Table of Contents

SECTION 4 - MACHINE OPERATION

After the cleaning process is complete, the engine will run

for approximately 5 minutes to allow the Engine and

Exhaust After Treatment (EAT) to cool down. The Indicator

Gauge will display the "Regen Complete" screen as shown

and the Emissions Temperature indicator will no longer be

illuminated.

Maintenance Standstill Cleaning Initiation Methods

Maintenance Standstill Cleaning can be started by one of two

methods, by using the Analyzer or the DPF button on the Ground

Console. All the same conditions as outlined under Standstill

Cleaning must be met.

4-10

Maintenance Standstill Cleaning will be stopped immediately if:

• The Platform/Ground Select switch is switched from

Ground to Platform mode

• Any function switch is enabled to perform a boom func-

tion

• The Engine is powered down

If Maintenance Standstill Cleaning is interrupted, it must be re-

initiated and the Indicator Gauge will display the "Regen Failed"

screen as shown.

31215018

Table of Contents

460sjc