SECTION 3 - MACHINE CONTROLS AND INDICATORS
Ground Control Console Display Gauge
The Display Gauge shows engine hours, fuel level (if applicable),
and Diagnostic Trouble Codes (DTCs) from both the JLG Control
System and the engine control system.
During machine start up, with no active DTCs in the control sys-
tem, the splash screen displays for 3 seconds and then switches
to the main screen. If there is an active DTC when powering up
the machine, the splash screen displays for 3 seconds and then
launches the Diagnostics Screen.
The indicator lamp lights when there is an active DTC in the Fault
Log.
Figure 3-1. Splash Screen
3-14
31215018