Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS AND INDICATORS
3.3
GROUND CONTROL CONSOLE
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF OR NEUTRAL POSITION WHEN RELEASED.
NOTE:
When machine is shut down the Platform/Ground
Select switch and Emergency Stop must be posi-
tioned to Off.
1.
Indicator Panel
The Indicator Panel contains indicator lights that signal
problem conditions or functions operating during machine
operation.
2.
Display Gauge
Registers amount of time machine has been
in use, with engine running. The hour meter
registers up to 16,500 hours and cannot be
reset.
3-8
NOTE:
On machines with diesel engines, when Glow Plug Indicator is
lighted (yellow), wait until light goes out before cranking engine.
3.
Engine Start/ Auxiliary Power
To start engine, switch must be held Up until
the engine starts.
To use auxiliary power, switch must be held
Down for duration of function use.
NOTE:
When the Platform/Ground Select Switch is in the
center position, power is shut off to the controls at both operat-
ing consoles. Remove key to prevent controls from being actu-
ated.
4.
Platform/Ground Select Switch
The three position, key operated switch sup-
plies power to the platform control console
when positioned to Platform. With the switch
key turned to the Ground position only
ground controls are operable.
31215018
Advertisement
Table of Contents
