5.1
GENERAL
This section explains steps to be taken in case of an emergency
situation while operating.
5.2
INCIDENT NOTIFICATION
JLG Industries, Inc. must be notified immediately of any incident
involving a JLG product. Even if no injury or property damage is
evident, the factory should be contacted by telephone and pro-
vided with all necessary details.
• USA: 877-JLG-SAFE (554-7233)
• EUROPE: (32) 0 89 84 82 20
• AUSTRALIA: (61) 2 65 811111
• E-mail: ProductSafety@JLG.com
31215018
SECTION 5. EMERGENCY PROCEDURES
FOLLOWING ANY INCIDENT, THOROUGHLY INSPECT MACHINE AND TEST ALL FUNC-
TIONS FIRST FROM GROUND CONTROLS, THEN FROM PLATFORM CONTROLS. DO NOT
LIFT ABOVE 3 M (10 FT) UNTIL YOU ARE SURE ALL DAMAGE HAS BEEN REPAIRED, IF
REQUIRED, AND ALL CONTROLS ARE OPERATING CORRECTLY.
5.3
Operator Unable to Control Machine
SECTION 5 - EMERGENCY PROCEDURES
Failure to notify manufacturer of an incident involving a JLG
Industries product within 48 hours of such an occurrence may
void any warranty consideration on that particular machine.
EMERGENCY OPERATION
IF THE PLATFORM OPERATOR IS PINNED, TRAPPED OR UNABLE TO
OPERATE OR CONTROL MACHINE:
1.
Other personnel should operate machine from ground con-
trols only as required.
2.
Other qualified personnel on platform may use platform
controls. DO NOT CONTINUE OPERATION IF CONTROLS DO
NOT FUNCTION PROPERLY.
3.
Cranes, forklift trucks or other equipment can be used to sta-
bilize motion of the machine.
5-1