SECTION 4 - MACHINE OPERATION
Traveling on a Grade
When traveling on a grade, maximum braking and traction are
obtained with the boom stowed, in position over the rear (drive)
axle, and in line with the direction of travel. Drive the machine for-
ward when climbing a grade, and in reverse when descending a
grade. Do not exceed the machine's maximum rated gradeability.
Figure 4-7. Traveling on a Grade
IF THE BOOM IS OVER THE FRONT (STEER) AXLE, DIRECTION OF STEER AND DRIVE
MOVEMENT WILL BE OPPOSITE FROM THE MOVEMENT OF THE CONTROLS.
4-22
4.2
PLATFORM
Platform Level Adjustment
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANTS TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
To Level Up or Down - Position Platform/Level con-
trol switch Up or Down and hold until platform is
level.
Platform Rotation
To rotate platform left or right, use the Platform
Rotate control switch to select direction and hold
until desired position is reached.
31215018