Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS AND INDICATORS
NOTE:
Both drive and steer functions work in the opposite direction
when the boom is positioned over front of the chassis (over idler
wheels).
NOTE:
When boom is positioned above horizontal and any of the fol-
lowing switches, Drive Speed/Torque Select or Function Speed,
are positioned to HIGH, high function speeds are automatically
cut out and the machine continues to operate at a lower speed.
NOTE:
The drive/steer control joystick can only command counter-
rotate by being moved in the joystick's left - to - right axis, after
first achieving the joystick neutral position.
9.
Telescope
Provides extension and retraction of the main
boom.
10.
Lights (If Equipped)
This switch operates the accessory lights
package if the machine is so equipped.
11.
Jib Lift (If Equipped)
Provides for raising or lowering of the jib.
3-20
12.
Soft Touch/SkyGuard/SkySense Override Switch
For machines equipped with SkyGuard:
The SkyGuard override switch enables
functions cut out by the Skyguard sys-
tem to be operated again, allowing the
operator to resume use of machine
functions.
For machines equipped with both SkyGuard and Soft Touch:
The switch operates like the SkyGuard
override switch as described above.
The switch also enables the functions
cut out by the Soft Touch system to
operate again at creep speed, allowing the operator to move
the platform away from the obstacle that caused the shut-
down situation.
For machines equipped with both SkyGuard and SkySense:
The switch operates like the SkyGuard
override switch as described above.
The switch also enables the functions
cut out by the SkySense system to
operate again at creep speed, allowing the operator to move
the platform closer to the obstacle that caused the shut-
down situation if desired.
31215018
Advertisement
Table of Contents
