Fall Arrest Platform; Pipe Racks - JLG 400SC Operation And Safety Manual

6.1

FALL ARREST PLATFORM

NOTE: See the JLG External Fall Arrest System manual (PN 3128935) for-
more detailed information.
The external fall arrest system is designed to provide a lanyard
attach point while allowing the operator to access areas outside
the platform. Exit/enter the platform through the gate area only.
The system is designed for use by one person. Personnel must
use fall protection at all times. A full body harness is required with
lanyard not to exceed 6 ft (1.8 m) in length, that limits the
maximum arrest force to 900 lb (408 kg) for the transfastener type
and 1350 lb (612 kg) for the shuttle type fall arrest system.
31215018
6.2

PIPE RACKS

Pipe Racks provide a way to store pipe or conduit inside the
platform in order to prevent rail damage and optimize platform
utility. This accessory consists of two racks with adjustable straps
to secure the load in place.
SECTION 6 - ACCESSORIES
6-3