Set Listening Host - HIKVISION iDS-TCH44P-B User Manual

Network Traffic Camera (Multi-lens LPR Camera) User Manual
Note
The test is single-use. You cannot test the connection repeatedly.
9. Click Save.

5.1.3 Set Listening Host

The listening host can be used to receive the uploaded information and pictures of the device
arming alarm.
Before You Start
The listening service has been enabled for the listening host, and the network communication with
the device is normal.
Steps
1. Go to Configuration → Device Configuration → System Configuration → Network Parameters .
2. Set ANPR IP Address and ANPR Port if you need to upload the alarm information.
3. Set Listening Host IP Address and Listening Host Port, and check Enable Picture Uploading
Listening if you need to upload pictures.
Note
ANPR and listening conflict with each other. When you enable listening host, pictures will be
uploaded via listening host in priority. When you disable listening and have set ANPR IP address
and port, pictures will be uploaded via ANPR protocol.
4. Set Preferred DNS Address if you need to visit the device with domain name.
5. Set Multicast Address if you need to preview the picture via the multicast group.
6. Click Save.
Figure 5-3 Set Listening Host
23